403 Model Painted White Metal Front Wheel Cover 22.5"

• Can be used on the front wheels
• Can be used on 22.5 inch wheels
• It is manufactured in a way suitable for use in all domestic and imported vehicles
• The product is made of metal and coated with baking paint

Package Contents

1 Piece Wheel Cover
Mounting Parts

Wheel Cover Assembly Instruction

Insert the metallic colored mounting wire into the rim with a crowbar or similar tool as shown in figures A and B.
In Figure A, the wire is for the front wheel cover, and in figure B, it is for the rear wheel cover.

Lay the wheel cover on the rim in the correct position so that the plastic feet fit exactly.
Please refer to figures A and B. Figure C shows the correct position, figure D shows the wrong position.

Push the wheel cover as shown in the figure until you hear the mounting sound from the plastic feet.
As shown in Figure 4, pull the wheel cover out by firmly grasping it through the air holes located in the middle.

"Locking Ring" - Fixing System:

• The easiest and most reliable wire system for fixing the wheel cover
• The screwing design of the wheel cover prevents fragmentation - disassembly on impact.
• This screwing system protects the wheel cover from theft.
• Since the wheel covers removed by the factory are integrated, the safety wheel cover does not pop off.
• It will not cause any difficulties for you during loading and assembly.

Installation Diagram:

1. Place the wire on which the feet are attached inside the rim.
2. Overlap the holes located on the hubcap to match the plastic parts located on the wire and place the wheel cover on the wire.
3. Tighten the screwing of the wheel cover until you are sure that it is fixed individually and mutually with the help of the allen