Snail Horn 12V

• Used in 12V vehicles.
• It is used in air and compressor vehicles.
• In vehicles without compressors, it also works with air tubes that can be filled in the vehicle.
• 3-10 Bar of air is required for snail horn use.
• An electrical connection is required for the use of the snail horn.
• The snail pipe part is plastic. 
• Air Pressure : 3-10 bar
• Sound intensity 2 metre 118db(A) ±5 db
• Current : 12V 2A
• Frekans : 400 Hz
• Weight : 575 g

What is an Air Horn ?

In the literature Air Horn Sound Warning Device referred to as, it is a vehicle whistle that makes a sound with the air pressed by an electric compressor. It can be produced in various voltages and powers according to vehicle types. 

What does an Air Horn do? ?

It is a vehicle and driving safety equipment that is widely used in vehicles for warning purposes. It is used for awareness formation by making a warning sound at the moment of danger.

How to install an Air Horn ?

We can clarify the question of How to install an Air Horn. We recommend that you get help from an expert auto electrician in this regard. Possible contacts may damage your vehicle.The most important thing to pay attention to is the correct connection of the cable ends.

• First of all, make sure that you have selected the right voltage product.
• The air horn must be fixed to a suitable point on the vehicle so that water does not enter the air horn pipe and the horn coil. The penetration of water into the air horn pipe or horn coil may cause a sound disorder or even the failure of your air horn to work. In addition, fluctuations due to vibration that will occur as a result of the mounting screws not being fully tightened may lead to unexpected failures.
• The "+" end from your horn installation should be connected to the "+" end of the air horn coil, and the "-" end from your horn installation should be connected to the "-" end of the air horn coil.( If you are installing a new horn in addition to the existing one, your electrician may need to add a relay to the system October. Please ask for help from your electrician who is an expert in the field.)
• Place the protective part that prevents the socket places from coming into contact with external factors on the cable legs.
• Connect the air hose from your compressor to the air inlet valve of your air horn.

            Your Air Whistle Horn is ready for use.

Note: If requested, you can immediately get the most suitable horn types for your vehicle at the most affordable prices from our store.You can visit our store to check the   Our horn types, honking sounds and horn prices